K3 | K3.veranda | K3.Geländer

Version 2.7.0 (K3.Core: 10.5.0)​

29.7.24

Features​

• LED strips can now also be configured under classic patio roofs
• Sliding doors now support glass and planking as infill panels

Bug fixes​

• LED spots now also work if only one rafter is configured.
• There was a situation at the roof projection where the projection and mullion would accidentally overlap in such a way that "Z-Fighting" would occur, i.e. the overlapping area would flicker. This has been fixed.

Version 2.6.0 (K3.Core: 10.5.0)​

Features​

• The configurator can now be embedded natively in the website/shop with our web component.
• We have adapted the watermark - it can now also be used for retailers.

Bug fixes​

• Feature: You can give wedge and door different glass colors
• Fixed: Plank wall full height can have gap on top.
• Fixed: LED strips partially only visible in night mode
• Fixed: Fabric curtain guide rails are too long
• Fixed: Awning profiles extend beyond rail
• Improved: Veranda has been updated to K3 3.21

Version 2.5.0 (K3.Core: 10.3.6)​

Features​

• There is the new side element "Shutters"
• There are now sliding doors
• Trapezoidal and corrugated sheet metal covers can now be rotated
• There is now also a structural girder/support beam on the rear side

Bug fixes​

• Improved: Trapezoidal and corrugated sheet metal white from below
• Improved: Veranda has been updated to K3 3.20
• Fixed: Camera loses focus of side element with plank wall
• Fixed: 3D hover does not use the color of a merchant
• Fixed: Trapezoidal sheet does not have the correct shape in AR from below
• Fixed: the coverings of trapezoidal and corrugated sheeting protrude into the supporting beams
• Fixed: Units of measurement decimal places do not react
• Fixed: Dimension chains do not show correct dimensions
• Fixed: Gap between wedge and sliding door
• Fixed: Model of flat roof Skyview incorrect
• Fixed: Additional wedge takes wrong attributes
• Fixed: Display problem with wedge & frame wall

Version 2.4.0 (K3.Core: 10.2.4)​

Features​

• There is now a carport.
• Page elements can now be added by clicking in 3D.
• We have updated to K3 3.19.

Bug fixes​

• Improved: Passage heights can be specified instead of roof pitches.
• Improved: Different symbol for extending the awning
• Improved: Facade can be colored and roughcast.
• Improved: Quality of the night mode
• Improved: Dimensions with units
• Fixed: Shop connection - cannot be deleted?
• Fixed: Gap in the wedge glass
• Fixed: LEDs on rafters not working properly

Version 2.3.0 (K3.Core: 9.7.1)​

Features​

This was a bugfix release.

Bug fixes​

• Improved: Update to K3 3.17
• Improved: Trapezoid and corrugated sheeting white from below
• Improved: Consistent keys for coverings
• Improved: 3D damping customizable
• Fixed: The under-roof awning protrudes into the side wall on the right (positioned too far out)
• Fixed: Elements behind initial selections visible
• Fixed: "Type" in extension list cannot be translated
• Fixed: Material color of the shades unrealistic
• Fixed: Side parts hoverboxes the wrong way around
• Fixed: Camera focus not centered
• Fixed: With wide roof you can't get far enough away with the camera
• Fixed: Plank walls full height have gaps
• Fixed: Zoom on side elements
• Fixed: Awning with roof overhang
• Fixed: Frame wall type 1 and type 2 end without wedge not centered
• Fixed: Wedge with tapered corner creates gap
• Fixed: Static beam not positioned correctly with free-standing

Special features​

Version 2.2.1 (K3.Core: 9.5.2)​

04.12.2024

Features​

• A watermark can be placed on the terrace.
• The dimensional chain for profile height can indicate wall clearance and connection height.
• LED spots and strips for slatted roofs
• The housing of the under-roof awning can be rotated

Bug fixes​

• Fixed: Various display problems in AR.
• Fixed: Hover boxes for page elements incorrectly positioned
• Fixed: Corrugated panels or trapezoidal roofs should be able to be indented further
• Fixed: Support for the under-roof awning is not centered
• Fixed: Privacy screen with frame wall type 2 structure does not make sense.
• Fixed: Freestanding roofs are not in camera focus when clicking the selection.
• Fixed: Dimension chains unit at mm
• Fixed: Better performance for roof shading (awnings)
• Fixed: Free text field displayed as [object Object] in the overview
• Fixed: Roof awning runs in the roof?
• Fixed: Hover buttons translations missing
• Fixed: Problems with complex sets of rules
• Fixed: Problems printing with large images.

Version 2.1.1 (K3.Core: 9.0.9-153-demo)​

14.10.2024

Bug fixes​

• The detailed information for a configuration could no longer be opened in certain cases.
• The editor no longer shows an error message after reopening the same configurator in the admin panel.

Version 2.1.0 (K3.Core: 9.0.9-rc)​

12.09.2024

Features​

• We support another option for arranging the handles on sliding glass doors. In addition to "left" and "all doors", there is now also a "left and right" option.
• We now support color-tinted panes in the side elements. One side can have one color. This only applies to side elements with glass.
• We now support overlying rafters. The size of the top and bottom rails can be adjusted via an attribute.
• We support internal shading. This means that the awning is not installed in its own box, but in the wall connection. It also runs much closer over the rafters on separate, thinner rails.
• Vertical awning housings are now available in different colors.
• We now support corrugated and trapezoidal sheet metal coverings. These are only useful in conjunction with cubic systems to enable carports.
• The vertical awning can now be set more precisely with more parameters: For example, the size of the box and the length of the projection of the fabric panel.

Bug fixes​

• Round posts were positioned differently than square posts due to incorrect center viewing.
• We now support the privacy wall as a selection so that it can cover the full height of the side wall.
• The rear screen wall no longer reacts to the roof pitch - which resulted in a slanted wall.
• The awning division on the rafters now works more precisely and does not cause any problems with intermediate dimensions.
• Several bug fixes to the side elements in some situations. There were some gaps or parts that were too large. This has been refined and there are fewer visible problems.
• The warning messages when side panels were removed, e.g. due to dimensional changes, are a thing of the past.
• Problems with the structural beam have been fixed. It no longer floats freely in the air when a roof overhang is selected.
• The support strips of vertical awnings have been adjusted so that they do not protrude "into the ground".
• The "interior view mode" has been removed due to camera problems.

Miscellaneous​

• The awnings should load faster.
• Night mode should load faster.
• Performance improvements thanks to k3/core update.
• The vertical awning as a 3D model has been completely replaced by R3F code, so that it now loads much faster and works more cleanly.

Version 2.0.0 (K3.Core: 8.5.7-rc)​

27.06.2024

Features​

• Dimensions can now also be specified in mm
• Slats can now be colored independently of the profile color
• Dimension chain at the front is now corrected to the passage height if a downstand beam is installed
• Camera view below the roof introduced via button

Bug fixes​

• Control of the interior/front awning improved
• Incorrect display of internal awning fixed
• Frame wall partially open at the side
• Rails with front-mounted vertical awning were shortened
• Correction of the formula calculation for the number of posts at the rear
• Correction of a problem with the roof projection

Preparations​

• Further development of carport function